alice88aut

Nissan Consult-3 Plus VS Nissan Consult-3 Diagnostic Tool

alice88auto | 21 February, 2019 08:11

Consult -3 Plus for Nissan Function:

Consult-3 Plus for Nissan can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .

And Consult III Plus can calcaulate the new 20 digital password for the Nissan new cars.

Consult-3 Plus for Nissan (Nissan Consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2016.
Consult-3 Plus for Nissan work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
Consult-3 Plus for Nissan support nissan car electrolic system diagnostic function.
Consult-3 Plus for Nissansupport nissan electromobiles such as Leaf.

Nissan Consult-3 Diagnostic Tool

22.1

Nissan Consult-3 Functions:

1.Swift Diagnosis and Swift Repairs Through Automated Operations

The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.

2.Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either  inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

3.Capable of Handling Multiple Complex Defects

The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

4.Enhanced Data Management with Improved Laptop PC

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

5.Map Data Update Function for Hard-Disk Navigation System

Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.

FAQ
Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic  it supports the Nissan up to 2017 year. And only Nissan Consult 3 Plus can support programming.

Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button “Immobilizer key” is gray color and is unavailable.

which Nissan diagnostic tool you should take depends on the models you wanna work with and also the functions you gonna perform:

For new cars, Nissan consult 3 plus works good.

For old cars, Consult 3 Bluetooth version covers more models before 2010.

For obdii diagnosis, all nissan scanners above are ok.

For ecu programming/reprogramming, consult 3 bluetooth, consult 3 plus, consult 4 are all ok.
https://www.autonumen.com/goods-1610-Consult-3+Plus+for+Nissan+Nissan+Diagnostic+Tool+Support+Programming.html

Autel MaxiCom MK906 vs. MaxiSYS MS906 vs. MaxiSYS Pro MS908P

alice88auto | 21 February, 2019 02:47

Right here comes the new diagnostic pad Autel produced – autel scanner MaxiCom MK906. so, how much do you understand it? Is it worth you dollars? Look here.
What’s Autel MaxiCom MK906:
Q: How much would be the up dates right after the free year to get updates? Is it 500 like the ms906.
A: Yes, exact same with MS906, one particular year free of charge update, then 495USD/year.
Q: Does it support coding and programming?
A: MK906 functions for coding but no luck with programming. For programming with autel scanner ms908p is definitely the only option.
Autel MK906 vs Autel MS906 vs autel ms908p:
Functions comparison:
Autel MS906 is employed for auto diagnostic test only, while MK906 and MS908P can function for not merely diagnosis but in addition ECU programming.
It depends on what you may need.
For diagnosis only, possess a Autel MS906.
For diagnosis and coding, have Autel MK906
For diagnosis and coding, programming, have Autel MK906 and MS908P
3.1
Hardware specifications comparison:
Autel Scanner Autel MK906 and MS906 pretty much share the identical hardware options. Each hardware is enhanced a great deal, compared with MS908P. But MK906 will likely be far better than MS906 for the reason that it’s lighter – fantastic to take it anyplace.
That may be, the new Autel MaxiCom MK906 wins, in terms of hardware style.
3.2
3.3
3.4
3.5

(Solved) John Deere Service Advisor Search Engine Error

alice88auto | 13 February, 2019 05:06

This is for anyone when he/she runs the John Deere Service Advisor heavy duty diagnostic software, the system appears error message that the search engine module can not be loaded and then the program ends.

NOTE THAT YOU ARE TRYING ANY TRICK ON YOUR OWN RISK.

Optional solutions:

Solution 1:

Run as system administrator, roll back pc date reactivate using activator Then roll date back to normal date if error still renew once again. Been working for me so far.

Note that, don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
Go to task manager look for the service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while

Solution 2:

if you set a date before the lightweightidol license expired, start the lightweightidol service, set the real date and start Advisor, it works.

Solution 3:

start advisor. when error comes with “search engine” Close John Deere SA. afterwards set your PC date to feburary 2015. start SA again (run as administrator). it now comes with error on licence. close SA Again. set pc date back to normal. run SA Again. now it Works.

Solution 4:

The search engine error can be solved.
Set back the date, before the expiry date found in Service ADVISOR\SUIR\license.log (august 14 in my case). Start LightweightIDOL service. Set the real date, and Advisor working again.
I made a batch file to simplify it. To make it work Control Panel/Regional/short date format have to be yyyy-mm-dd or you have to modify batch. Maybe you have to modify ServiceADVISOR.exe path too in the batch. Have to run as administrator.

Solution 5:

I have had the same error with ssearch engine connection in JD SA.
reinstalled it twice, changed system date back and forward, run activator. No result for me.

But actually I found the solution for this issue.

Solution 6:

back date to 08.10.16
install JD SA, restart, activate, mount latest disk you have (05.2016) and install update, for finish get license error, ignore and close, set actualy date, run JD SA -> works fine, install july update

testing today on 3 laptops (Windows 7 and 10)

On a side note: procedure about turning off the updates don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
goto task manager look for the service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while Smile (SO TURN IT OFF IN TASKMANAGER SO IT STARTS 20 30 YEARS FROM NOW!!)

Fresh new installations also work but can be much more complicated sure a patch would be much easier. But it can be done with out a patch so far

In taskmanager I don’t stop any service just put service advisor updater to 2030 to start

also makes sure eculp.ini configurator reads like this

A valid ECULP License has been found

Licenses for the following modes have been found:
TestCell Programming
FinalEOL Programming
Service Programming
ECUCPP Programming Tool

All JD Components were found and properly licensed

JDEcu : Version 1.0 : 01-apr-2021
JDConfig : Version 1.0 : 01-apr-2021
JDData : Version 1.0 : 01-apr-2021
JDIntelHex : Version 1.0 : 01-apr-2021
JDPayloadReader : Version 1.0 : 01-apr-2021
JDPayloadProcessor : Version 1.0 : 01-apr-2021
ECULoaderProgram : Version 1.0 : 01-apr-2021
ECULP_TestCell : Version 1.0 : 01-apr-2021
ECULP_FinalEOL : Version 1.0 : 01-apr-2021
ECULP_Service : Version 1.0 : 01-apr-2021
ECULP_TestCell_OEM : Version 1.0 : 01-apr-2021
ECULP_FinalEOL_OEM : Version 1.0 : 01-apr-2021
ECULP_Service_OEM : Version 1.0 : 01-apr-2021
ECULP_ECUCPP : Version 1.0 : 01-apr-2021
ECULP_Direct_EOL_Output : Version 1.0 : 01-apr-2021
ECULP_OEM_DISTRIBUTOR : Version 1.0 : 01-apr-2021
Service_ADVISOR_Ag : Version 1.0 : 01-apr-2021
Service_ADVISOR_CF : Version 1.0 : 01-apr-2021

AUTEL MaxiSYS Pro MS908P Diagnostic System with WiFi Update Online

alice88auto | 29 January, 2019 06:00

The MaxiSYS? Pro has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis. MaxiSYS? Pro utilizes an ultra-powerful A9 quad-core, 1.40GHz Processor that offers a 50% increase in speed versus competing products, a 9.7” LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State hard drive, the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage.

Autel MS908 Pro Descriptions:
The MaxiSYS? Pro includes the J-2534 reprogramming box and special MaxiSYS? Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks. The MaxiSYS? Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

Autel Tools AUTEL MaxiSYS Pro MS908P Product Features & Functions:

Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
Extraordinarily powerful Cortex-A9 quad-core processor
9.7 inch 1,024×768 LED-backlit glossy widescreen Multi Touch display with IPS technology
Built-in 5-megapixel rear camera with autofocus; Virtual on-screen keyboard· Wi Fi wireless to access your favorite web resources & automatically update new software
Unique shop tough ergonomic design features strong rubber protection and housing
Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
USB, audio, and auxiliary ports make it easy to connect accessories
Internal Reliable and fast 32GB Solid State Drive for better performance

AUTEL MaxiSYS Pro MS908P FAQ:
Q1:Can I use it to do gearbox programming of the Toyota MMT and Mitsubishi?
A1:Sorry, it can not.

Q2: Can I connect the MaxiSYS Pro MS908P with my car in other way? Such as the bluetooth. Or I can only connect through the cable?
A1:The device include one Ipad with one diagnostic box. The diagnostic box communicate with the Ipad by bluetooth. But diagnostic box need to connect cars by cable or connector.

Q3: Can I use the AUTEL MaxiSYS Pro MS908P to program the ECM module?
A3: Some cars can do. Some cars can not.

Q4: What is the difference between the AUTEL MaxiSys MS908 and the AUTEL MaxiSYS Pro MS908P?
A4:AUTEL MaxiSYS Pro MS908P can do the programming function, while the MS908 can not.

CAT ET III WIFI Diagnostic Scanner Caterpillar ET3 Adapter III 317-7485

alice88auto | 29 January, 2019 02:18

Heavy Duty Diagnostic CAT ET III WIFI Caterpillar ET3 Adapter III 317-7485 Diagnostic Scanner

CAT Communications Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.

2015A Caterpillar ET3 Adapter III Communication:

1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

MB Star C3 092015 Xentry cannot work on W204

alice88auto | 25 January, 2019 03:40

Mb Star C3 Star diagnostic system failed to work on Mercedes W204? Here is the customer solution. You are at your risk!

Problem:

I have DELL D630 with Xentry 09/2015 and MB Star C3 multiplexer. I have connected many cars (W202, W203, W210, W211, W245, etc) and there is no problem with connection – everything is working like a charm. Some days ago, I have bought W204 C280 from 2007. After I choose model, engine and transmission, and I go to diagnostic I see this:

“The diagnosis application is being started…”

and few seconds later this:

“Initialization of the multiplexer has failed”

My Mux is not compatible with W204? I searched few hours without success.

Customer solution:
W204 and X204 is the last Mercedes models which working without some special modifications.
You can try:

First try in toolkit.ini delete line skipcomports=all and set line usecomport=2 then you will see in SDconnect toolkit PartD on display after mux connection.

First save your original file for sure.

Try look into C:\Userdata\Config\Xentry\driver – slave.ini and set there com port which you have used for PartD.

Report:

There was no change because I didn’t restarted system. After restart work perfect.

Your solution work perfectly! Probem solved. Everything is working like a charm.

Autonumen.com solution:

If you need to deal with newer Mercedes models, better go for MB SD Connect Compact 4 or Mercedes BENZ C5 diagnostic system.

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

alice88auto | 23 January, 2019 05:07

The old bluetooth cat et adatper iii has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, VOBDII.COM has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Car Diagnostic Tools CAT Communications Adapter III 317-7485 is the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

True 2015A Caterpillar ET3 Adapter III P/N 317-7485 Experienced Diagnostic Adapter for CAT from www.autonumen.com with WIFI

This can be the only encouraged communication device for Auto Repair Software CAT, and the only datalink device which will permit you to properly communicate having a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Enables communication in between service tools and engine controls employing numerous data hyperlinks which include J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash plan permits adapter firmware upgrades as further features grow to be available;

3. Uses J1939/11, high-speed information link (a part of ADEM III controls), substantially lowering flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to three minutes).

How to Change John Deere Speed Limit with PLD File Editor

alice88auto | 17 January, 2019 11:13

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

With John Deere PLD File Encryptor/Decryptor you can:

-Decrypt PayLoad (PLD) file to txt/ini format
-Modify PLD file expiration
-Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h)
-Adjust PLD file to different product serial
-Encrypt PLD file
-Program controller with modified PLD using Service Advisor
-Support Windows XP

Example: How to change speed limit with  pld files?

Q1:

Question about payload files:

I have pld files of my tractor (6330P) 11 in total.

I see in bottom of each files info about my tractor (option, serial number etc)

Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?

A1:
You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;

For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.

var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;

After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)

You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.

Q2:
Does it work with SA 4.2?
A2:

Service Advisor is just a tool to use pld. Pld editor works without SA.

Q3:
I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??

A3:
most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443

Q4: Do you have John Deere PLD file editor for sale?

A4: Sorry, we don’t have PLD files. You can search or download from google.

Lonsdor K518ise New Function introduction

alice88auto | 10 January, 2019 03:03

Lonsdor K518ISE Key Programmer new  adds Trial update , clearer car logo, operation reference and push functions features. Here’s the functions introduction:

1. Click “Trail Apply” to get the latest update.
Note:

Step1. Each device can apply for only one time, once click, counting will start and will lasts for 90 days, then the “Trial apply” menu will disappear.

Step2. Functions with blue clock will be for free for 3 months, after that time, customer will need to subscribe to use.

Step3. The rest functions updated this time will be for free for ever.

4. Check the update log for a basic idea of the update content this time. For more details, Lonsdor will update continuously later in flyer, please check the update log later then. Also you can check official website for the detailed car list.

2. New and clearer car logo

3. Search the car by model initials

4. Scan the QR code to get operation reference during programming.

Step 1: Click the red mark to get the QR code

Note: So far, lots of car models have Help reference. Once there is a red mark as shown above, you can scan to get detail operation reference.

Step 2: Scan the code with your phone to get Operation instruction during programming.

5. Push function In case customer need Lonsdor to support certain car model, and we may already have it on our inner test device, though not release on standard K518 yet; Or when Lonsdor developed certain function while can’t find local car to test, if customer can find the local car to test, please contact Lonsdor and we will release the function only to your device for certain time(it depends), as a return for your kind help.

FAQ Autel MaxiSys Elite Diagnostic Tool with J2534

alice88auto | 04 January, 2019 04:39

Q:  What is the difference between Autel maxisys elite and maxisys pro?

A: MaxiSys elite comes with upgraded Hardware, Docking station, Better resolution screen, overall quicker unit..

The elite model offers more features than the pro version.

Q: It is original? Do you have warranty?

A:One year quality insurance. you can contact us at any time.

Q:  How about coding keys?

A:Yes,30% Discount Products Maxisys elite can do key coding.This is the most advanced tool in automotive market.

Q: Does it come preregistred?

A: No, you should register it with your own ID and password. It only takes a few minutes, very easy to do it.

Q:HOW MANY FREE UPDATES COME WITH PURCHASE OF MAXISYS ELITE.

WHAT WILL HAPPEN IF I DO NOT UPDATE IT,OR IF I WANT TO UPDATE IT AFTER A YEAR OR TWO

A:It comes with one year free update. And you can still use it if you do not wanna to upgrade it.

Q:Which J2534 ECU Programmer the Pro or the Elite?

A: The J2534 programmer for the Pro and the Elite have no function difference. There are 2 versions of the MaxiFlash Pro. The original unit has an antenna and new unit (MaxiFlash Elite) is smaller without the antenna.

Autel MaxiSys Pro MS908P

alice88auto | 28 December, 2018 02:38

Autel MaxiSys pro MS908P is an evolutionary smart solution for specialized automotive diagnosis and ECU programming. Designed with the DNA of Autel’s diagnostics family, the MaxiSys is built to offer many of the prestigious qualities of the MaxiDAS DS708 with extreme ease of use and powerful diagnostic performance.

Autel MaxiSys Pro Description

The MS908 PRO has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis.MaxiSYS Pro utilizes an ultra-powerful A9 quad-core, 1.40GHz processor that offers a 50% increase in speed versus competing products, a 9.7” LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State hard drive, the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage.

The MaxiSYS Pro includes the J-2534 reprogramming box and special MaxiSYS? Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.

The MaxiSYS Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

Autel MaxiSys Pro MS908P J2534 adapter

Autel MaxiSys Pro Hardware
* Extraordinarily powerful Cortex-A9 quad-core processor
* 9.7” 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology
* Internal reliable and fast 32GB Solid State Drive for better performance
* Built-in 5-megapixel rear camera with autofocus and flashlight
* Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
* Unique shop tough ergonomic design features strong rubber protection and housing;
* Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
* USB, audio and auxiliary ports make it easy to connect accessories
* The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth

Autel MaxiSys Pro Software

* Open source Android Operating System for fast boot-up and multitasking
* Easy and intuitive navigation makes finding what you need simple and fast
* Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
* Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
* Displays live data in text, graph and analog for easy data review and analysis
* Configure live data display options, set alarms, record, and playback data frames with one touch
* Records and playbacks live data to pinpoint troubles of sensors and components
* Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
* Remote technical support for convenient demonstration, training and increased customer satisfaction
* Prints out recorded data anytime and anywhere with Wi-Fi technology
* Automatic Wi-Fi updates available in new software releases

Porsche Piwis Tester II?

alice88auto | 20 December, 2018 08:32

Porsche Piwis Tester II with CF30 Laptop ( Life-time Chargeless Upgrade )
Porsche Piwis Tester II is the latest able tester, the a lot of poweful analyze and offline programming apparatus for Porsche, with latest tester for Porsche, able functions, abounding access.
Porsche Piwis Warm Tips:
Second-hand laptop CF30, 90%-95% new;
New software is continuously provided, accepted adaptation is V14.3500;
Requires ONLINE modules: (F BCM R BCM DME ELV SRS KEY).
Top 9 Reasons to Get Porsche Piwis Tester II:
1. Software Version: V14.350 ( Life-time Chargeless Upgrade )
2. Laptop: CF-30 (Second Hand)—Software is central the Hard Drive. No charge Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Amend Method: By CD or HDD (One Year for Free, It can not be adapted online. 200USD for one time amend afterwards one year.)
5. Software contains operating arrangement win XP only. you just charge to admit into your computer and use it.
6. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
7. Porsche Piwis Tester II Software Chargeless Download (American Server)
8. PPN online account is available(key programming,etc),service amount is not included
9. Bluetooth,GPS and Navigation Function are available. But you charge to pay for the approval of them.
30% Discount Products Porsche Piwis Tester 2 Functions:
1. Read/clear absurdity code, bolt abstracts stream, computer programming match, basal test, aliment advice consult, apparatus website drawing, base diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is able with the Panasonic laptop and aboriginal software for the test. Porsche Piwis Tester II can advice you analyze and affairs the a lot of new and old affectionate of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can alone be diagnosed by application Porsche Piwis Tester II. Based on accepted activity planning, all beforehand car models will gradually be afflicted over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I accept to be acclimated for beforehand models in the Porsche branch until end of 2010.
4. Support for Porsche. Piwis Tester I will no best be accessible already the beforehand analytic programs accept been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will accommodate one basal section of software. This is all-important in adjustment to alpha and configure the tester.

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

alice88auto | 13 December, 2018 09:07

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

1.BMW ICOM A2 Hardware Version: V2018.03
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming Software
5. NEW EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC Ready to Use

This is the package offer for 30% Discount Products BMW ICOM A2+B+C for with 2018.03V Software Plus EVG7 Diagnostic Controller Tablet PC, buy them together, save you a lot.Our engineer can install and test ok for you to use.

Compatible with BMW ICOM, ICOM A2, ICOM Next and ICOM PRO+A3

Software Version : V2018.03

ISTA – D: V4.09.13,with SDP data V4.09.13
ISTA – P: V3.63.02.001 can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2017.12.01

Not connected 9000 days remaining

BMW ETK: 2018.03
BMW KSD: 03.2018 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding
With free BMW Engineer Software (INPA5.00, NCS3.5.1, WinKFP5.2.3, E-Sys 3.27.1, Psdzdata 63.2), BMW FSC code generator and BMW AiCoder

1. Support Multi-language: American English, British English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified Chinese and Traditional Chinese
2. Software Version: Newest V2018.03
3. Support Vehicles: For BMW Cars, For BMW Motorcycle, For Rolls-Royce, For Mini Cooper
4. Support for BMW All Series Diagnose and Programming

Support Model:
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

EVG7 DL46 Specification:

Mark : EVG7

Model : DL46

Processor : Intel Celeron 1037(Dual – 1.8Ghz/L3 2M)

DDR : The biggest support memory : 4GB

HDD : 500 GB SATA HDD.
LCD : 10.4 Inch The resolution of the 1024×768

Graphics : touchscreen widescreen LED backlight, the core graphics Intel HD Graphics

Speakers : Built-in Speakers

Wireless : 802.11b/g/n

LAN : The built-in 10-100M card

Bluetooth : BT2.0 , 4.0

USB : USB3.0 / Mini USB / 2 x USB2.0

Card Reader : TF Card Reader

Other Interface : VGA Voice Input / The Sound Output / DC Power Jack / Parallel LPT Port I/O VGA Output

Battery Type : 9 The core of lithium batteries 10.08V 6600 mAh

Power Adapter : 110V-240V The adaptive communication power supply

Battery Life : The specific time depending on the use environment

Specifications : 270×180×60 mm

weight : 1911g (with battery)

Certificates : CE / FCC / RoH

What to do If The GM MDI Software On PC Can?t Communicate With MDI

alice88auto | 06 December, 2018 06:31

When you use GM MDI on a PC, you may meet some trouble. Let’s see what you can do when it can’t communicate.

First, you should make sure that the MDI Manager software should be installed on the PC and the MDI must be powered up before you use it to communicate. Also the MDI should be configured for wired ethernet or wireless communication. If the USB is available, the MDI will connect by using the USB and if not, the MDI will connect by using wired ethernet and if neither of them is available, the MDI will connect by using wireless.

If the MDI can not communicate with the MDI, you should check the cables if they are securely attached to the MDI, if the MDI has completed its power up sequence, if the connector pins are clean and if the MDI Manager software is running.

And if you connect them by using USB, you need to check the MDI USB connection is detected by windows. About the solutions,you can connect the MDI to the PC USB port and power up the MDI. Open the Network and Dial-up Connections Window from the Windows Control Panel. Then check for the device name ETAS USB Remote NDIS Network Device. If it is not running, check all USB ports on the PC and verify that the MDI is powered on.

If you connect them by using wireless ethernet, you should make sure that wireless communication is enabled and the IP configuration is properly set using the MDI Manager software. Then what you need to check is that the USB cable is not plugged in, the MDI is not being used via wired ethernet and the wireless card is properly seated in the MDI. You can contact your IT department and check that your PC is detecting the wireless access point and the correct security settings have been configured for the MDI.

And if you connect then by using wired ethernet, you need to ensure that the wired ethernet communication is enabled and configured using the Professional Diagnostic Tools MDI Manager software. Then you should check that the USB cable is not plugged in and the MDI device detects wired ethernet activity by viewing the lights blinking on the wired ethernet port of the MDI. And also you can contact your local IT department and check that the MDI and the PC are on the same subnet.

Different between MB SD Connect Compact 5 and MB SD C4 Star Diagnostic Tool

alice88auto | 01 December, 2018 04:06

MB SD C4 Star Diagnostic Tool is the professional diagnostic tool for benz cars and trucks. This is the popular tool which enjoy the market of Benz diagnosic Market.

Recently, one of the new tool which named MB SD Connect Compact 5 launch to the market. It is the update version of MB SD C4.

What is the different between these two tools?

The performs of MB SD Connect Compact 5 same function as MB SD Connect C4 with newer design. The new MB SD Connect C5 with same case as original Xentry Connect 5 multiplexer. Other features are exactly the same as MB SD C4. The new MB SD Connect C5 is cheaper in price than mb sd connect c4.

Comparing the features of MB Star Diagnostic Tools MB SD CONNECT Compact C4 , what is the different?

The host communication connection end USES from design, to avoid inadvertently fall in the normal use of the communication port to connect and communication failure, etc.
DC 12 v power supply design/host upgrades to avoid the battery installation/battery voltage instability/host can’t enter the shutdown state, etc, caused by the motherboard and rapid  aging of the battery.
The host CPU radiator surface and perfectly fit alloy shell, good heat dissipation effect. Equipment running smoothly, don’t crash.
The host USES the tamper clasp, should to avoid fragile warranty sticker damage caused by the warranty disputes.
Host wifi protected the upgrade for PC plastic shell, solid quality does not affect the wi-fi signal.
OBD main telecommunication lines connected to the host end upgraded to VGA15 industrial-grade connector.
Network upgrade for gigabit connections/pure copper wire core/double layer aluminum foil/woven mesh/silica insulation material. Gigabit communication Against interference/pulling  open circuit / / fracture in low temperature.

MB SD C5 Supported System: ENGINE, automatic transmission, air conditioning system, SRS, ABS and ASR, MPL, GM, Benz original security DASX system, KEYZESS GO system and OBD II system, etc.

Lastest version software for MB SD Connect C5 is 2016.05.

Vehicle coverage : Mercedes Benz Car, Bus, Truck,Sprint, Smart from 2000 up to now;Especial for 2015 new models like W222, W221, W212, W203, 211,204,GL166, B 246, CLS 218, SLK172.

MB SD Connect C5 more special functions,such as engineer mode, remove limitations,etc.It can also support offline SCN coding functions.

1 2 3  Next»
 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6